Modifications

Sauter à la navigation Sauter à la recherche
4 octets supprimés ,  29 juin 2014 à 09:44
aucun résumé de modification
Ligne 2 : Ligne 2 :     
== Intro ==
 
== Intro ==
{{ADF-Image|EZ-LINK-Programmer-Arduino-01.jpg}}
+
{{ADFImage|EZ-LINK-Programmer-Arduino-01.jpg}}
    
Unlike any other Bluetooth module, you can use the EZ-Link to program an Arduino. The reason this is possible is because EZ-Link can dynamically change the baud rate and has the ability to send the DTR signal from the Arduino IDE wirelessly through the module. Both are required if you want to be able to quickly change to the 115.2K signal required for upload and toggle the DTR lines.  
 
Unlike any other Bluetooth module, you can use the EZ-Link to program an Arduino. The reason this is possible is because EZ-Link can dynamically change the baud rate and has the ability to send the DTR signal from the Arduino IDE wirelessly through the module. Both are required if you want to be able to quickly change to the 115.2K signal required for upload and toggle the DTR lines.  
Ligne 27 : Ligne 27 :  
* EZ-Link '''DTR''' to a 1µF capacitor in series with Arduino '''Reset''' (The cap is in series, so Reset goes to the capacitor +, and capacitor - goes to DTR)
 
* EZ-Link '''DTR''' to a 1µF capacitor in series with Arduino '''Reset''' (The cap is in series, so Reset goes to the capacitor +, and capacitor - goes to DTR)
   −
{{ADF-Image|EZ-LINK-Programmer-Arduino-10.jpg}}
+
{{ADFImage|EZ-LINK-Programmer-Arduino-10.jpg}}
    
If you're using an Arduino compatible such as a Mini or Boarduino (or any of the other hundreds of Arduino-compat's), chances are it has an FTDI connector on it. You can plug the EZ-Link directly in, the '''GND''' pin lines up with the '''Black''' wire, and the '''DTR''' pin lines up with the '''Green''' wire. No other components are required
 
If you're using an Arduino compatible such as a Mini or Boarduino (or any of the other hundreds of Arduino-compat's), chances are it has an FTDI connector on it. You can plug the EZ-Link directly in, the '''GND''' pin lines up with the '''Black''' wire, and the '''DTR''' pin lines up with the '''Green''' wire. No other components are required
   −
{{ADF-Image|EZ-LINK-Programmer-Arduino-11.jpg}}
+
{{ADImage|EZ-LINK-Programmer-Arduino-11.jpg}}
    
== Upload ==
 
== Upload ==
29 918

modifications

Menu de navigation