Pi-WiringPi-Installation
Téléchargement et installation
WiringPi is maintained under GIT for ease of change tracking, however there is a Plan B if you’re unable to use GIT for whatever reasons (usually your firewall will be blocking you, so do check that first!)
If you do not have GIT installed, then under any of the Debian releases (e.g. Raspbian), you can install it with:
sudo apt-get install git-core
If you get any errors here, make sure your Pi is up to date with the latest versions of Raspbian:
sudo apt-get update sudo apt-get upgrade
To obtain WiringPi using GIT:
git clone git://git.drogon.net/wiringPi
If you have already used the clone operation for the first time, then
cd wiringPi git pull origin
Will fetch an updated version then you can re-run the build script below.
To build/install there is a new simplified script:
cd wiringPi ./build
The new build script will compile and install it all for you – it does use the sudo command at one point, so you may wish to inspect the script before running it.
Plan B
Cliquez sur l'URL: (cela devrait ouvrir une nouvelle page)
https://git.drogon.net/?p=wiringPi;a=summary
Cherchez ensuite un lien indiquant "snapshot" sur le côté droit de la page. Cliquez sur le lien le plus haut.
Cela téléchargera un fichier tar.gz avec un nom semblable à wiringPi-98bcb20.tar.gz. Notez que les noms et lettres après wiringPi (98bcb20 dans ce cas) sera probablement différent – ils sont uniques pour chaque release.
Vous devez ensuite exécuter les commandes suivante pour procéder à l'installatio:
tar xfz wiringPi-98bcb20.tar.gz cd wiringPi-98bcb20 ./build
Souvenez vous que le vrai nom de fichier tar.gz sera certainement différent - vous aurez besoin d'ajuster la première ligne de commande en conséquence.
Tester l'installation de wiringPi
Exécutez les commandes du GPIO pour vérifier l'installation de WiringPi:
gpio -v gpio readall
Cela devrait vous fournir l'assurance que cela fonctionne correctement.
WiringPi est libéré sous licence "GNU Lesser Public License" version 3.
Source: WiringPi.com. WiringPi est une libraire sous licence GPL écrite par Gordon Henderson. Crédit: wiringpi.com
Traduit de l'anglais par Meurisse D. pour MCHobby.be
Traduit avec l'accord de Gordon Henderson, créateur de wiringPi - Translated with authorization of Gordon Henderson, creator of wiringPi
Toute référence, mention ou extrait de cette traduction doit être explicitement accompagné du texte suivant : « Traduction par MCHobby (www.MCHobby.be) - Vente de kit et composants » avec un lien vers la source (donc cette page) et ce quelque soit le média utilisé.
L'utilisation commercial de la traduction (texte) et/ou réalisation, même partielle, pourrait être soumis à redevance. Dans tous les cas de figures, vous devez également obtenir l'accord du(des) détenteur initial des droits. Celui de MC Hobby s'arrêtant au travail de traduction proprement dit.