ENG-CANSAT-MISSION1-RECEIVE
Révision datée du 30 octobre 2018 à 15:36 par Admin (discussion | contributions)
En cours de traduction/élaboration. |
Introduction
The following wiring will prepare the "Receiver Station" for the mission 1. From the "RFM69HCW Testing" section, we will use an Arduino UNO and RFM69HCW module to redirect the Radio Messages to the serial port.
Wiring
Feather M0 Express | RFM69 |
5V | VIN |
GND | GND |
11 | MOSI |
12 | MISO |
13 | SCK |
4 | CS |
3 | G0 |
2 | RST |
Written by Meurisse D. from MC Hobby - License: CC-SA-BY.