Modifications
Sauter à la navigation
Sauter à la recherche
← Modification précédente
Modification suivante →
ENG-CANSAT-PICO-MISSION1-AUTONOMOUS
(voir la source)
Version du 21 avril 2022 à 09:19
2 octets ajoutés
,
21 avril 2022 à 09:19
→Sparing Power
Ligne 73 :
Ligne 73 :
# Keeping the Pico Powered via USB as much as possible (with a computer or a powerbank).
# Keeping the Pico Powered via USB as much as possible (with a computer or a powerbank).
# Disabling the PowerBoost (and power down the complete projet):
# Disabling the PowerBoost (and power down the complete projet):
−
* '''WITHOUT''' Cansat Kit: Use a slide switch (or a jumper) to tie the '''PowerBoost EN''' to the GND
+
#
* '''WITHOUT''' Cansat Kit: Use a slide switch (or a jumper) to tie the '''PowerBoost EN''' to the GND
−
* '''With''' Cansat Kit: The slide switch (or jumper) can be placed near of the border of the board.
+
#
* '''With''' Cansat Kit: The slide switch (or jumper) can be placed near of the border of the board.
[[Fichier:ENG-CANSAT-PICO-CONTENT-14.jpg|640px]]
[[Fichier:ENG-CANSAT-PICO-CONTENT-14.jpg|640px]]
Admin
Bureaucrates
,
Administrateurs
29 917
modifications
Menu de navigation
Outils personnels
Se connecter
Espaces de noms
Page
Discussion
Variantes
Affichages
Lire
Voir le texte source
Voir l’historique
Plus
Rechercher
Navigation
ARDUINO
RASPBERRY-PI
[:: PI Hacking ::]
Particle.IO
Micro Python
Imprimante 3D
Actualités
Modifications récentes
Page au hasard
Aide
Outils
Pages spéciales
Version imprimable