Différences entre versions de « SBK-DataLogger »

De MCHobby - Wiki
Sauter à la navigation Sauter à la recherche
Ligne 17 : Ligne 17 :
  
 
The columns displays:
 
The columns displays:
* Sensor name
+
* Sensor identification
 
* Measurement short name
 
* Measurement short name
 
* last sampled data
 
* last sampled data
 
* physical unit
 
* physical unit
 +
 +
=== Data recording ===
  
 
The user interface would allow to selects the data to be captured as well as the sample frequency.  
 
The user interface would allow to selects the data to be captured as well as the sample frequency.  
Ligne 29 : Ligne 31 :
 
# the data is stored inside internal memory storage.
 
# the data is stored inside internal memory storage.
  
The data are then available for further extraction to a SD card under CSV file format.
+
Each new data recording will create a distinct data collection file in the internal memory storage.
 
 
 
 
  
Chaque donnée réceptionnée par le Data Logger peut faire l'objet de micro-traitements mathématiques comme mise-à-zero/tare ou calcul élémentaire (moyenne, maxima, minima).
+
The data collections are available for further extraction to a SD card under CSV file format.
  
 +
=== Data bus ===
  
Une fois l'enregistrement activé (action utilisateur requise), une copie des données est également préservé dans l'unité de stockage du Data Logger.
+
While recording the data, the measurement are actively sent over the Data Bus allowing other extension devices to perform treatments based on the collected data.
Chaque nouvel activation de l'enregistrement crée un nouveau fichier CSV.
 
Les données peuvent ensuite être récupérées sous forme de fichier CSV (Tableur) en connectant le module Data Logger sur un ordinateur (SBK-DataLog apparait comme un lecteur USB).
 
Enfin, SBK-Datalog propose un connecteur de communication permettant de connecter un (ou plusieurs) périphériques d'extension sur le Data Logger.
 
  
 
== Ressources ==
 
== Ressources ==

Version du 3 mai 2024 à 23:33

What is the SBK-DataLogger ?

The SBK Data Logger is the earth of the "STEM Belgian Knife" project. The SBK Data Logger is designed to ease STEM activities and technical training (FMTTN).

Sbk-dataloger-specimen.jpg

SBK-DataLogger is a Smart Data Logger capable of capturing physical quantity data (atmospheric pressure, luminosity, wind speed, acceleration, etc).

Very simple to use, the DataLogger automagically detects the connected sensor and identifies the data collection available.

Thanks to its display, the user can immediately preview the data.

SBK-datalogger-data-preview.jpg
Specimen of previewed data

The columns displays:

  • Sensor identification
  • Measurement short name
  • last sampled data
  • physical unit

Data recording

The user interface would allow to selects the data to be captured as well as the sample frequency.

Once the data logging started by the user:

  1. the data are collected from sensor,
  2. the data is stamped with a timestamp,
  3. the data is stored inside internal memory storage.

Each new data recording will create a distinct data collection file in the internal memory storage.

The data collections are available for further extraction to a SD card under CSV file format.

Data bus

While recording the data, the measurement are actively sent over the Data Bus allowing other extension devices to perform treatments based on the collected data.

Ressources


Written by Meurisse D. for MCHobby


MCHobby investit du temps et de l'argent dans la réalisation de traduction et/ou documentation. C'est un travail long et fastidieux réalisé dans l'esprit Open-Source... donc gratuit et librement accessible.
SI vous aimez nos traductions et documentations ALORS aidez nous à en produire plus en achetant vos produits chez MCHobby.