When working right, the red LED on Trinket is probably blinking showing the sensors that are tripped - this is normal as the PIR sensor probably sees you moving and you might not have the magnets against the mag sensors. Place the magnets next to the mag sensors and aim the PIR away from you. The system should "set up" (no blinking). Then when you move in front of the sensor it should blink once a second or so with more blinks depending on which sensors tripped as follows:}} | When working right, the red LED on Trinket is probably blinking showing the sensors that are tripped - this is normal as the PIR sensor probably sees you moving and you might not have the magnets against the mag sensors. Place the magnets next to the mag sensors and aim the PIR away from you. The system should "set up" (no blinking). Then when you move in front of the sensor it should blink once a second or so with more blinks depending on which sensors tripped as follows:}} |