Ligne 44 : |
Ligne 44 : |
| | | |
| == Spécifications du Boarduino == | | == Spécifications du Boarduino == |
− | The specifications for the DC boarduino include:
| + | Les spécifications du Boarduino DC inclus: |
− | | |
− | Designed to plug into a breadboard for easy prototyping
| |
− | Petite size, only 3" x 0.8" (75mm x 20mm)
| |
− | All 'standard' pins are brought out - Digital 0 thru 13, Analog 0 thru 5, ARef, 5V, Ground, Vin and Reset
| |
− | 2 LEDs, green power and red "pin 13" LED just like the Arduino Diecimila
| |
− | Standard Reset button
| |
− | ATmega328P, running at 16.00 MHz, just like the latest Arduino, the Duemilanove (note that the product photo above hasn't been updated)
| |
− | 6-pin standard ICSP header
| |
− | Standard 2.1mm DC jack (just like the original Arduino) with 5V regulator to run on 7V-17V power (DC)
| |
− | USB or External power, selectable with a jumper (just like original Arduino)
| |
− | 1N4001 diode protects against using incorrect wall adapter
| |
− | 6-pin header at the end for a USB-TTL cable
| |
− | Auto-reset capability when used with a USB-TTL cable
| |
− | Available as a low cost kit with standard parts, so its never out of stock
| |
− | All through-hole parts are easy to solder
| |
| | | |
| + | * Conçu pour s'insérer facilement dans un breadboard pour faciliter le prototypage |
| + | * Petite taille, seulement 75mm x 20mm |
| + | * Dispose de toutes les broches/pins 'standards' - Digital 0 à 13, Analogique 0 à 5, ARef, 5V, Ground, Vin et Reset |
| + | * 2 LEDs. Led verte pour "power" (alimentation) & Led rouge comme "pin 13" comme sur les Arduino. |
| + | * Un bouton "Reset" standard |
| + | * Un ATmega328P, cadencé a 16.00 MHz (comme les tout derniers Arduino).<br />''Notez que la photo du produit n'a pas été mise-à-jour). |
| + | * Un connecteur ICSP standard (6 broches) |
| + | * Un connecteur DC (courant continu) Jack 2.1mm comme sur un Arduino.<br />Un régulateur de 5V qui accepte des alimentation de 7V-17V (DC/continu) |
| + | * Alimentation USB ou Externe, sélectionnable à l'aide d'un cavalier ("jumper" en anglais) |
| + | * une diode de protection 1N4001. Protège des adaptateurs mal polarisés. |
| + | * Un pinHeader à 6 broches en bout de carte pour y brancher un câble USB-TTL (ou un [http://mchobby.be/PrestaShop/product.php?id_product=77 convertisseur FTDI USB/Serie]) |
| + | * Support de l'Auto-Reset. |
| + | * Disponible en kit avec des éléments standards... et par conséquent toujours disponible. |
| + | * Tous les composants sont de type "through-hole" (avec des broches qui travese la carte) pour faciliter les opérations de soudure. |
| | | |
| {{MCH-Accord}} | | {{MCH-Accord}} |
| | | |
| {{ADF-Accord}} | | {{ADF-Accord}} |