Modifications

== Mettons le sous tension ==

== Mettons le sous tension ==

OK. Let's power it up.

Voilà, c'est le moment de mettre notre Pi Zero sous tension.

With the SD card inserted, apply power via a USB cable to the '''PWR IN''' connector as shown.

Insérez la carte SD dans le connecteur PUIS mettez le Zero sous tension en branchant le câble USB sur le connecteur '''PWR IN''.

{{ADFImage|Pi-Zero-Headless-Donner-la-Vie-01.jpg|640px}}

{{ADFImage|Pi-Zero-Headless-Donner-la-Vie-01.jpg|640px}}

You should see some activity on the green LED light. This means the Pi Zero found a good OS image and is booting.

Vous devriez voir de l'activité sur la LED verte. Cela signfie que le Pi Zero à trouver un OS et qu'il est capable de le charger (l'image gravée sur la carte est correcte).

 

After a minute or two, you can try and ping the Pi Zero to see if it has connected to your network. You can access the Pi Zero using mDNS style addressing. Windows users will require some additional setup. [https://learn.adafruit.com/bonjour-zeroconf-networking-for-windows-and-linux/#microsoft-windows Read here].

After a minute or two, you can try and ping the Pi Zero to see if it has connected to your network. You can access the Pi Zero using mDNS style addressing. Windows users will require some additional setup. [https://learn.adafruit.com/bonjour-zeroconf-networking-for-windows-and-linux/#microsoft-windows Read here].