Différences entre versions de « SBK-DataLogger »

De MCHobby - Wiki
Sauter à la navigation Sauter à la recherche
 
(2 versions intermédiaires par le même utilisateur non affichées)
Ligne 55 : Ligne 55 :
 
* Dead Simple User Interface
 
* Dead Simple User Interface
 
* Autonomous (on batteries)
 
* Autonomous (on batteries)
* Sample speed
+
* Sample speed:
 
** burst mode (''as fast as possible'')
 
** burst mode (''as fast as possible'')
 +
** 1/10ms, 20ms/1, 1/50ms, 1/100ms
 
** 1/s to 1/h
 
** 1/s to 1/h
 
* Copy data to SD
 
* Copy data to SD

Version actuelle datée du 5 juillet 2024 à 16:53

Early Preview

This documentation is at early preview stage.

What is the SBK-DataLogger ?

The SBK Data Logger is the earth of the "STEM Belgian Knife" project. The SBK Data Logger is designed to ease STEM activities and technical training (FMTTN).

Sbk-dataloger-specimen.jpg

Sbk-dataloger-smart.jpg

SBK-DataLogger is a Smart Data Logger capable of capturing physical quantity data (atmospheric pressure, luminosity, wind speed, acceleration, etc).

Very simple to use, the DataLogger automagically detects the connected sensor and identifies the data collection available.

By waiting the final product, here is a preview of the development and test version:

Sbk-dataloger-dev-version.jpg

Display

The Data Logger fits a 3.5" display allowing the user to preview the current sensor data.

Thanks to the wider screen, the larger font used will facilitate the data visualisation.

SBK-datalogger-data-preview-02.jpg
Specimen of previewed data

The columns displays:

  • Sensor identification
  • Measurement short name
  • last sampled data
  • physical unit

Data recording

The user interface would allow to selects the data to be captured as well as the sample frequency.

Once the data logging started by the user:

  1. the data are collected from sensor,
  2. the data is stamped with a timestamp,
  3. the data is stored inside internal memory storage.

Each new data recording will create a distinct data collection file in the internal memory storage.

The data collections are available for further extraction to a SD card under CSV file format.

Data bus

While recording the data, the measurement are actively sent over the Data Bus allowing other extension devices to perform treatments based on the collected data.

Features

DataLogger features:

  • Dead Simple User Interface
  • Autonomous (on batteries)
  • Sample speed:
    • burst mode (as fast as possible)
    • 1/10ms, 20ms/1, 1/50ms, 1/100ms
    • 1/s to 1/h
  • Copy data to SD
  • Act as USB key on computer
  • Data bus

Data features:

  • Unit conversion
  • Zero-point setup
  • Basic formula (multiply/divide/mean/max/min)
  • Show/Hide
  • More info (on sensor)
  • Formatting rules ??

Ressources


Written by Meurisse D. for MCHobby


MCHobby investit du temps et de l'argent dans la réalisation de traduction et/ou documentation. C'est un travail long et fastidieux réalisé dans l'esprit Open-Source... donc gratuit et librement accessible.
SI vous aimez nos traductions et documentations ALORS aidez nous à en produire plus en achetant vos produits chez MCHobby.