In this lesson, you will build on what we have learnt in lesson 11 and use a LCD display to show the temperature and light intensity.
+
Dans ce tutoriel, vous allez construire un outil<br />
+
basé sur un [[Afficheur LCD|afficheur LCD introduit dans ce tutoriel]].
−
[[Fichier:afficheur-lcd-part2-intro.jpg]]
+
Cet outil utilisera l'afficheur LCD pour afficher la<br />
+
température et l'intensité de la lumière.
−
Light intensity is measured using the same photocell that you used dans le tutoriel "[[Photo-résistance]]".
+
{{ADFImage|afficheur-lcd-part2-intro.jpg|450px}}
−
To measure the temperature, you will use a temperature measurement chip. This device has just three leads two for 5V and GND and the third lead is connected directly to an analog input on the Arduino.
+
L'intensité de la lumière est mesurée en utilisant une photorésistance ("''LDR'' ou ''photocell'' en anglais) identique à celle utilisé dans le tutoriel "[[Photo-résistance]]".
+
+
Pour mesurer la température, nous allons utiliser un circuit intégré (le célèbre TMP36). Ce dispositif dispose de 3 broches, 2 pour le 5V et GND(la masse) et une broche a connecter directement sur l'entrée analogique d'un Arduino.