32 920
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 117 :
Ligne 117 : + + + Ligne 125 :
Ligne 128 : + + + + + + + + + + + + + + +
ENG-CANSAT-PICO-USER-GUIDE (voir la source)
Version du 20 février 2022 à 04:32
, 20 février 2022 à 04:32→Analog Pins
* '''3V3_EN''' -
* '''3V3_EN''' -
* '''GND''' -
* '''GND''' -
=== Digital Pins ===
xxx
=== Analog Pins ===
=== Analog Pins ===
* '''GP26''' - ADC0
* '''GP26''' - ADC0
* '''GP26''' - VSYS/3
* '''GP26''' - VSYS/3
* '''AGND''' -
* '''ADC_VREF''' - 3.3V filtered, do not applies any voltage to that pin.
=== UARTs ===
xxx
REPL on UART(0)
=== Other Pins ===
xxx
* '''RUN''' - xxx. Act like '''Reset''' pin.
* '''3V3_EN''' - Already mentionned. Deactivate the 3.3V power regulator when tied to the ground.
* '''GP23''' - PowerSave internal board pin. Depending on the conditions, this pin can reduce the power consumption of the board.
* '''GP24''' - Altready mentionned. This internal board pin is High when the board is connected to a computer or wall adapter (when VBus = 5V).
=== Debug Pins ===
=== Debug Pins ===