32 908
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 254 :
Ligne 254 : − + Ligne 286 :
Ligne 286 : + + + + + + + + + + + + + + + + + + + + + + + +
ENG-CANSAT-PICO-MISSION1-CAPTURE (voir la source)
Version du 6 mars 2022 à 17:56
, 6 mars 2022 à 17:56→The code explained
</syntaxhighlight>
</syntaxhighlight>
This section is immediately followed by the various CONSTANT declaration.
This section is immediately followed by the various CONSTANT used in the script.
<syntaxhighlight lang="python">
<syntaxhighlight lang="python">
bmp = BME280( i2c=i2c, address=BMP280_I2CADDR )
bmp = BME280( i2c=i2c, address=BMP280_I2CADDR )
</syntaxhighlight>
</syntaxhighlight>
At the end of initialization section, we do creates the instances for the analog reading (the TMP36, named {{fname|adc}}) and LED controling (named {{fname|led}}).
<syntaxhighlight lang="python">
# TMP36 analog pin
adc = ADC(Pin(26))
# Onboard LED
led = Pin(25, Pin.OUT)
</syntaxhighlight>
Just before the main loop, the script print the essential data.
<syntaxhighlight lang="python">
# Main Loop
print( 'Frequency :', rfm.frequency_mhz )
print( 'encryption :', rfm.encryption_key )
print( 'NODE_ID :', NODE_ID )
print( 'BASESTATION_ID:', BASESTATION_ID )
print( '***HEADER***' )
print( ":iteration_count,time_sec,pressure_hpa,tmp36_temp,bmp280_temp;" )
print( '***DATA***' )
</syntaxhighlight>
The main loop is composed of an infinite {{fname|while}} loop.
== Fault tolerant design ==
== Fault tolerant design ==