575 octets ajoutés
, 1 janvier 2013 à 20:48
{{afficheur-lcd-part2-nav}}
The breadboard layout is based on the layout from lesson 11, so if you still have this on the breadboard it will simplify things greatly.
[[Fichier:afficheur-lcd-part2-montage.jpg]]
There are a few jumper wires that have been moved sightly on this layout. In particular, those near the pot.
The photocell, 1 kΩ resistor and TMP36 are all new additions to the board. The TMP36 has its curved face towards the display.
<small>Créer par [http://learn.adafruit.com/users/srmonk Simon Monk] pour AdaFruit</small>
{{ADF-Accord}}
{{MCH-Accord}}