This command will enable Eddystone support on the Bluefruit LE module. Eddystone support must be enabled before the other related commands can be used.
+
Cette commande activera le support Eddystone sur le module Bluefruit LE. Le support Eddystone doit être activé avant d'utiliser les autres commandes.
* Codebase Revision: 0.6.6
* Codebase Revision: 0.6.6
−
* Paramètres: 1 or 0 (1 = enable, 0 = disable)
+
* Paramètres: 1 ou 0 (1 = activé, 0 = désactiver)
−
* Sortie: The current state of Eddystone support if no Paramètres are provided (1 = enabled, 0 = disabled)
+
* Sortie: l'état actuel du support Eddystone si aucun paramètre est fournit à la commande. 1 = activé, 0 = désactivé
−
{{ambox-stop|text=This command was removed in firmware 0.7.0 to avoid confusion. Use AT+EDDYSTONESERVICEEN in 0.7.0 and higher.}}
+
{{ambox-stop|text=Cette commande est remplacée par AT+EDDYSTONESERVICEEN depuis le firmware 0.7.0 . La commande AT+EDDYSTONEENABLE n'est plus disponible depuis la version 0.7.0 afin d'éviter les confusions.}}
−
<nowiki># Enable Eddystone support
+
<nowiki># Activer le support Eddystone
AT+EDDYSTONEENABLE=1
AT+EDDYSTONEENABLE=1
OK
OK
−
# Check the current Eddystone status on the module
+
# Vérifier le statut du support Eddystone sur le module