ENG-CANSAT-BMP280

De MCHobby - Wiki
Sauter à la navigation Sauter à la recherche

Install the Library

Manual Installation

The Adafruit's BMP280 is provided with a library available on GitHub.

You can download and install the library manually by dowloading it from the BMP280 Repository.

Download-icon.pngDownload the BMP280 lib from the repository

Note that BMP280 library rely on the Adafruit_Sensor library which declare an unified data structure to store data across all the Adafruit's Sensors Libraries.

Download-icon.pngDownload the Unified Sensor lib from the repository

Easier Installation

You can also use the "Library Manager" to ease the installation of the BMP280 library.

From the "Sketch" menu, select the sub-menu "Include library" --> "Library Manager" like shown on the picture here under.

ENG-CANSAT-BMP280-00.png

In the library manager, key-in the value "BMP280" in the search box. Then click on the install button in the front of the Adafruit BMP280 Library by Adafruit.

ENG-CANSAT-BMP280-01.png

Great, the BMP280 library is now installed!

From "Library Manager", search for the "Adafruit Unified Sensor" like shown on the picture here under.

ENG-CANSAT-BMP280-02.png

Then install it.

Wiring the sensor

xxx

Testing the sensor

The sensor can be easily tested with the Adafruit Example code (installed with the library).

The sample code is available through the File menu under the sub-menu Example --> Adafruit BMP280 Library --> BMP280test.

ENG-CANSAT-BMP280-03.png

#include <Wire.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BMP280.h>


Adafruit_BMP280 bme; // I2C
  
void setup() {
  Serial.begin(9600);
  Serial.println(F("BMP280 test"));
  
  if (!bme.begin()) {  
    Serial.println("Could not find a valid BMP280 sensor, check wiring!");
    while (1);
  }
}
  
void loop() {
    Serial.print("Temperature = ");
    Serial.print(bme.readTemperature());
    Serial.println(" *C");
    
    Serial.print("Pressure = ");
    Serial.print(bme.readPressure());
    Serial.println(" Pa");

    Serial.print("Approx altitude = ");
    // 1013.25 is the pressure at sea level. It should be ajusted
    // with your local forecast for a corect evaluation of altitude
    Serial.print(bme.readAltitude(1013.25)); 
    Serial.println(" m");
    
    Serial.println();
    delay(2000);
}



Written by Meurisse D. from MC Hobby - License: CC-SA-BY.