29 879
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 1 :
Ligne 1 : − {{traduction}}+ + + + + + + + + + + + + + + + + + + + + +
ENG-CANSAT-FEATHER-M0-FORCING-FLASH (voir la source)
Version du 8 novembre 2018 à 16:00
, 8 novembre 2018 à 16:00→Workaround
{{ENG-CANSAT-NAV}}
{{ENG-CANSAT-NAV}}
== Issue Description ==
Sometime, it happens that compilation phase get complete successfully but the binary can't get uploaded to the board.
== Reason ==
The M0 board Flash Mode does not get activated from the Arduino IDE environment.
== Workaround ==
Activate the Flash Mode before compiling & uploading your sketch.
To do so, '''PRESS TWICE the reset''' button.
[[Fichier:ENG-CANSAT-FEATHER-M0-FORCING-FLASH.jpg|320px]]
Once done, the Flash Mode is activated and the board will show itself as an USB Stick named "FEATHERBOOT" (Windows and other operating system does show a file navigation window).
[[Fichier:ENG-CANSAT-FEATHER-M0-FORCING-FLASH-01.png|320px]]
Then, '''press the Upload''' button into Arduino IDE environment.
This time, the sketch will be copied to the board... and Feather M0 properly reset.
{{ENG-CANSAT-TRAILER}}
{{ENG-CANSAT-TRAILER}}