29 910
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 1 :
Ligne 1 : − {{traduction}} Ligne 9 :
Ligne 8 : − + + + + + + + + + + + + +
ENG-CANSAT-FEATHER-M0-FORCING-FLASH (voir la source)
Version du 8 novembre 2018 à 16:00
, 8 novembre 2018 à 16:00→Workaround
{{ENG-CANSAT-NAV}}
{{ENG-CANSAT-NAV}}
== Issue Description ==
== Issue Description ==
Sometime, it happens that compilation phase get complete successfully but the binary can't get uploaded to the board.
Sometime, it happens that compilation phase get complete successfully but the binary can't get uploaded to the board.
== Workaround ==
== Workaround ==
Activate the Flash Mode
Activate the Flash Mode before compiling & uploading your sketch.
To do so, '''PRESS TWICE the reset''' button.
[[Fichier:ENG-CANSAT-FEATHER-M0-FORCING-FLASH.jpg|320px]]
Once done, the Flash Mode is activated and the board will show itself as an USB Stick named "FEATHERBOOT" (Windows and other operating system does show a file navigation window).
[[Fichier:ENG-CANSAT-FEATHER-M0-FORCING-FLASH-01.png|320px]]
Then, '''press the Upload''' button into Arduino IDE environment.
This time, the sketch will be copied to the board... and Feather M0 properly reset.
{{ENG-CANSAT-TRAILER}}
{{ENG-CANSAT-TRAILER}}