29 837
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 1 :
Ligne 1 : − {{traduction}} Ligne 9 :
Ligne 8 : − + Ligne 15 :
Ligne 14 : − + + +
ENG-CANSAT-FEATHER-M0-FORCING-FLASH (voir la source)
Version du 8 novembre 2018 à 16:00
, 8 novembre 2018 à 16:00→Workaround
{{ENG-CANSAT-NAV}}
{{ENG-CANSAT-NAV}}
== Issue Description ==
== Issue Description ==
Sometime, it happens that compilation phase get complete successfully but the binary can't get uploaded to the board.
Sometime, it happens that compilation phase get complete successfully but the binary can't get uploaded to the board.
== Workaround ==
== Workaround ==
Activate the Flash Mode before compiling your sketch.
Activate the Flash Mode before compiling & uploading your sketch.
To do so, '''PRESS TWICE the reset''' button.
To do so, '''PRESS TWICE the reset''' button.
[[Fichier:ENG-CANSAT-FEATHER-M0-FORCING-FLASH.jpg|320px]]
[[Fichier:ENG-CANSAT-FEATHER-M0-FORCING-FLASH.jpg|320px]]
Once done, the Flash Mode is activated and the board will show itself as an USB Stick (Windows and other operating system does show a file navigation window).
Once done, the Flash Mode is activated and the board will show itself as an USB Stick named "FEATHERBOOT" (Windows and other operating system does show a file navigation window).
[[Fichier:ENG-CANSAT-FEATHER-M0-FORCING-FLASH-01.png|320px]]
Then, '''press the Upload''' button into Arduino IDE environment.
Then, '''press the Upload''' button into Arduino IDE environment.