29 910
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 7 :
Ligne 7 : − + + + + + + + + + + +
ENG-CANSAT-MISSION1-CAPTURE (voir la source)
Version du 28 octobre 2018 à 14:33
, 28 octobre 2018 à 14:33→Wire the BMP280 sensor
And transmissing the information via the RFM69HCW radio module.
And transmissing the information via the RFM69HCW radio module.
=== Wire the BMP280 sensor ===
=== Wire the barometric sensor ===
The BMP280 is wired on the I2C bus of the Feather.
The BMP280 is wired on the I2C bus of the Feather.
[[Fichier:ENG-CANSAT-BMP280-wiring.png|320px]]
[[Fichier:ENG-CANSAT-BMP280-wiring.png|320px]]
=== Wire the temperature sensor ===
Connect the TMP36 sensor as follows:
* The pin 1 (on the left) to a power source (3.3V),
* The pin 3 (the the right droite) to the ground/GND.
* The pin 2 (middle one) to the A3 analogue input.
[[Fichier:ENG-CANSAT-TMP36-01.png|480px]]
=== Wire the radio module ===
Finally wire the RFM69HCW radio as follows:
{{ENG-CANSAT-TRAILER}}
{{ENG-CANSAT-TRAILER}}