{{asm-text}} Replace the board on the desk to see the "PowerBoost" text.
+
{{asm-text}} Flip the board again (to see the "PowerBoost" text).
−
Slides the PowerBoost 500 as
+
Slides the PowerBoost 500 on the connector and Solder it.
+
+
'''WARNING: Electronic components must be visible on the breakout!'''
+
+
{{underline|Tip:}}
+
* Push on the PowerBoost breakout with the nail against the connector.<br />This will flatten the breakout on the connector (and make it paralleled to the base board).
+
* Charge the tip of the iron with some solder.
+
* Tack a drop of solder a pin to make the breakout staying right in place (no need to be perfect right now)
+
* Solder the other pins of the breakout
+
* Now solder the initial tacked pin (to have a nice & great solder join on that pin too)