29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 83 :
Ligne 83 : − +
→PowerBoost 500 Charger Soldering
* Push on the PowerBoost breakout with the nail against the connector.<br />This will flatten the breakout on the connector (and make it paralleled to the base board).
* Push on the PowerBoost breakout with the nail against the connector.<br />This will flatten the breakout on the connector (and make it paralleled to the base board).
* Charge the tip of the iron with some solder.
* Charge the tip of the iron with some solder.
* Tack a drop of solder a pin to make the breakout staying right in place (no need to be perfect right now)
* Tack a drop of solder on one pin to make the breakout staying right in place (no need to be perfect right now)
* Solder the other pins of the breakout
* Solder the other pins of the breakout
* Now solder the initial tacked pin (to have a nice & great solder join on that pin too)
* Now solder the initial tacked pin (to have a nice & great solder join on that pin too)