ENG-CANSAT-PICO-CONTENT

Cansat Pico in few words

The CanSat-Pico-Kit is build around the Raspberry-Pi Pico plateform.

The Raspberry-Pi Pico is a powerful dual core microcontroller created by the Raspberry-Pi foundation. It is distributed with the MicroPython firmware, it can also be programmed with C++ and Arduino.

Just care about voltage, the Pico is 3.3V logic. Do not apply any voltage greater than 3.3V to any GPIO on the Pico.

MicroPython is a very robust environment natively compiling and running python script. MicroPython fits a compiler, a python virtual machine and a file system to store the script. Thanks to MicroPython, everything learned with Python language or MicroPython boards can be applied to the Pico.

Cansat Pico Kit content

The Cansat Pico Kit is designed to be compact, evolutive, customisable, sizable (in height) and programmed in Python (thank to MicroPython).

Once assembled with spacer you designed, you do have a cylindrical development plateform with plenty of space.

You can develop your project:

• either in the inner space between the bottom and the top boards.
• either using smaller spacers to develop your project in the inner space and also the outer space.

Outer space can also be used thanks to the through holes PCBs and the labelling the both sides of the PCBs.

Pico Boards

The Raspberry-Pi Pico is at the earth of this kit. One is soldered onto the Cansat Kit, the other is free for use to make prototyping or creating the receiving base station.

See the Cansat Pico User Guide section for more information on its integration.

See the Official Pico MicroPython starter guide for learning more about MicroPython on Pico.

Kit content

TO REVIEW COMPLETELY

	Description	Quantité
Raspberry-Pi Pico	Dual core RP2040 MCU @ 133 MHz with 264Ko RAM & 2 Mo Flash. One Pico is used on the Cansat kit, the other is used for prototyping. disponible ici chez MCHobby	2
Cansat base dev. board for Pico	Solder a Pico onto it and drive your cansat project with MicroPython. disponible ici chez MCHobby	1
Cansat proto board	Prototyping board connected to the Pico GPIO. disponible ici chez MCHobby	1
FPC ribbon	This ribbon connects the base board to the proto board. disponible ici chez MCHobby	1
USB A/microB 1m cable	Can be used to plug your pico on a computer to program it or to reload the Lipo. disponible ici chez MCHobby	1
Half Size Breadboard	Solderless breadboard are used for fast prototyping. disponible ici chez MCHobby	1
Multi-functional breadboard wires	Set of wires with plug that can be modified from female to male. disponible ici chez MCHobby	1
PowerBoost 500 charger	Convert a Lipo battery power into usable 5V power source. This board can also reload the Lipo when the kit is powered via USB. disponible ici chez MCHobby	1
Lithium Polymer Battery	Transform the Feather into an autonomous plateform with this 1300mAh Lipo. disponible ici chez MCHobby	1
JST-SH fast connexion wire	This 100mm wire can be used to connect Qwiic or StemmaQt board to the Pico in a snap disponible ici chez MCHobby	1
BMP280 – Barometric pressure sensor	Easily evaluate pressure, altitude and temperature. This board expose a StemmaQt connector disponible ici chez MCHobby	1
TMP36 – analog temperature sensor	Transform the sensor voltage read on analog input into an easy-to-read temperature. disponible ici chez MCHobby	1
RFM69HCW Transceiver Radio	Transport data over long distance with packet radio. One breakout act as emitter, the second one as receiver. disponible ici chez MCHobby	2

---

Written by Meurisse D. for MCHobby