29 836
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 36 :
Ligne 36 : − + − product 5V ---------------------------------------+ − Disable PIN --------------------------------------+ − + + +
ENG-CANSAT-PICO-CONTENT (voir la source)
Version du 10 février 2022 à 13:47
, 10 février 2022 à 13:47→Cansat Pico kit in few words
As the Raspberry-Pi Pico doesn't features Lipo battery circuitery, we do added a special connector to plug an [https://www.adafruit.com/product/1944 Adafruit PowerBoost 500 charger] on the board.
As the Raspberry-Pi Pico doesn't features Lipo battery circuitery, we do added a special connector to plug an [https://www.adafruit.com/product/1944 Adafruit PowerBoost 500 charger] on the board.
Just connect the Pico to you computer (or power it with a wall adapter) and the Lipo will auto-magically start to charge-up. Unplug your pico from computer and the PowerBoost charger will start to discharge the battery to power your project.
Just connect the Pico to you computer (or power it with a wall adapter) and the Lipo will auto-magically starts to charge-up.
Unplug your pico from computer and the PowerBoost charger will take over. The Lipo will discharge to power your project.
Thanks to the PowerBoost, your cansat projet do also have a 5V power rail (500 mA max).
[[fichier:ENG-CANSAT-PICO-CONTENT-14.jpg|480px]]
Needs to spare energy? no problem, the "Power Off" pin is available near of the board boundary. Once the PWR_OFF tied to the ground, the PowerBoost is disabled (as Pico and the project).
[[fichier:ENG-CANSAT-PICO-CONTENT-14.jpg|640px]]
=== Cansat Pico Kit content ===
=== Cansat Pico Kit content ===