Until now, we have worked with the emitter linked to a computer via USB cable.
Until now, we have worked with the emitter linked to a computer via USB cable.
Ligne 73 :
Ligne 72 :
# Keeping the Pico Powered via USB as much as possible (with a computer or a powerbank).
# Keeping the Pico Powered via USB as much as possible (with a computer or a powerbank).
# Disabling the PowerBoost (and power down the complete projet):
# Disabling the PowerBoost (and power down the complete projet):
−
## Use a slide switch (or a jumper) to tie the '''PowerBoost EN''' to the GND
+
#* '''WITHOUT''' Cansat Kit: Use a slide switch (or a jumper) to tie the '''PowerBoost EN''' to the GND
−
## Use
+
#* '''With''' Cansat Kit: The slide switch (or jumper) can be placed near of the border of the board.
+
[[Fichier:ENG-CANSAT-PICO-CONTENT-14.jpg|640px]]
+
+
{{dbox-orange|Keeping the Pico Powered before launch have the advantage of having the software already running.<br />Powering-up at the last moment is also the risk of discovering an unespected issue (depending on how the setup have been tested). }}