* '''Pour le module ESP8266 brute''' ou '''NodeMCU Lolin''' vous aurez besoin de brancher un bouton pour ramener le GPIO0 à la masse et un deuxième bouton pour ramener la broche RESET à la masse. Maintenez le bouton GPIO0 enfoncé (ou connectez le à la masse) ET pressez puis relachez le bouton RESET pendant que vous maintenez GPIO0 à la masse. Relâcher finalement la broche GPIO0.
+
* for the '''raw ESP8266''' or '''NodeMCU Lolin''' you will need to wire the GPIO0 to the GROUND with a push-button THEN do the same with the RESET line.
−
* Pour le {{pl|733|breakout HUZZAH ESP8266}} les boutons GPIO0 et RESET sont déjà inclus sur la carte. Maintenez le bouton GPIO0 enfoncé (ou connectez le à la masse) ET pressez puis relâchez le bouton RESET pendant que vous maintenez GPIO0 à la masse. Relâcher finalement la broche GPIO0.
+
* Maintain the GPIO0 button down (to connect it to the Ground) THEN press and release the RESET button (while still maintaining GPIO0).
+
* AFTER release the GPIO0 button. => you just activated the Flash mode.
+
+
On some board like {{pl|733|breakout HUZZAH ESP8266}} the GPIO0 and RESET button are already available on the board. This will ease the operation.