29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 7 :
Ligne 7 : − <h2>+ − <a href="#serial-drivers-for-windows-7" class="anchor-link"><span class="fa fa-link"></span></a><span id="serial-drivers-for-windows-7" class="anchor-link-target"></span>Serial Drivers (for Windows 7)</h2> − <h2>+ − <a href="#determine-your-serial-port" class="anchor-link"><span class="fa fa-link"></span></a><span id="determine-your-serial-port" class="anchor-link-target"></span>Determine Your Serial Port</h2> Ligne 19 :
Ligne 17 : − <h2>+ − <a href="#install-serial-port-terminal-software" class="anchor-link"><span class="fa fa-link"></span></a><span id="install-serial-port-terminal-software" class="anchor-link-target"></span>Install Serial Port Terminal Software</h2>
FEATHER-M0-MicroPython-REPL (voir la source)
Version du 13 décembre 2017 à 20:43
, 13 décembre 2017 à 20:43→Windows
== Windows ==
== Windows ==
=== Serial Drivers (for Windows 7) ===
If you are using Windows 7 you will need to install drivers. Click below to download the driver package and install it! This is not necessary for Mac, Linux or Windows 10+.
If you are using Windows 7 you will need to install drivers. Click below to download the driver package and install it! This is not necessary for Mac, Linux or Windows 10+.
=== Determine Your Serial Port ===
Next you must determine the name of the serial port for your board. It's easiest to look at the serial ports with the board disconnected (on Windows check '''Device Manager '''under the '''Ports (COM/LPT)''' node
Next you must determine the name of the serial port for your board. It's easiest to look at the serial ports with the board disconnected (on Windows check '''Device Manager '''under the '''Ports (COM/LPT)''' node
{{ADFImage|FEATHER-M0-MicroPython-REPL-01.png|640px}}
{{ADFImage|FEATHER-M0-MicroPython-REPL-01.png|640px}}
=== Install Serial Port Terminal Software ===
'''On Windows''' you'll want to use a tool like <a href="http://www.chiark.greenend.org.uk/~sgtatham/putty/">PuTTY</a> to connect to the serial port. Download and run PuTTY, then configure it to use a serial connection to the board's COM port at 115200 baud similar to as shown below:
'''On Windows''' you'll want to use a tool like <a href="http://www.chiark.greenend.org.uk/~sgtatham/putty/">PuTTY</a> to connect to the serial port. Download and run PuTTY, then configure it to use a serial connection to the board's COM port at 115200 baud similar to as shown below: