29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 107 :
Ligne 107 : + + + + +
FEATHER-M0-Utiliser-Arduino-IDE (voir la source)
Version du 25 avril 2016 à 20:51
, 25 avril 2016 à 20:51→Boot manuel
You may need to go back and reselect the 'normal' USB serial port next time you want to use the normal upload.
You may need to go back and reselect the 'normal' USB serial port next time you want to use the normal upload.
== Fix pour Linux et Ubuntu ==
Note if you're using Ubuntu 15.04 (or perhaps other more recent Linux distributions) there is an issue with the modem manager service which causes the Bluefruit LE micro to be difficult to program. If you run into errors like "device or resource busy", "bad file descriptor", or "port is busy" when attempting to program then you are [https://bugs.launchpad.net/ubuntu/+source/modemmanager/+bug/1473246 hitting this issue].
The fix for this issue is to make sure Adafruit's custom udev rules are applied to your system. One of these rules is made to configure modem manager not to touch the Feather board and will fix the programming difficulty issue. [https://learn.adafruit.com/adafruit-arduino-ide-setup/linux-setup#udev-rules Follow the steps for installing Adafruit's udev rules on this page].
{{FEATHER-M0-TRAILER}}
{{FEATHER-M0-TRAILER}}