Le bus SPI fonctionne en 4MHz par défaut (pour supporter les shields Arduino UNO.
Le bus SPI fonctionne en 4MHz par défaut (pour supporter les shields Arduino UNO.
−
=== Compatibilité des broches Arduino Uno Rev3 ===
+
=== Compatibilité avec les broches Arduino Uno Rev3 ===
−
Arduino Shield Supported Features Galileo is compatible with Arduino UNO shields and is designed to support 3.3V or 5V shields, following the Arduino Uno Revision 3, including:
+
Une fonctionalité de Galileo est de supporter les Shields Arduino UNO et il a été conçu pour supporter les shields 3.3V ou 5V.
+
+
En suivant les caractéristiques de l'Arduino Uno Revision 3, cela inclus:
* '''14 digital input/output pins''', of which 6 can be used as Pulse Width Modulation (PWM) outputs;
* '''14 digital input/output pins''', of which 6 can be used as Pulse Width Modulation (PWM) outputs;
Ligne 53 :
Ligne 55 :
** For Galileo it is not possible to change the upper end of the analog input range using the AREF pin and the analogReference() function.
** For Galileo it is not possible to change the upper end of the analog input range using the AREF pin and the analogReference() function.
−
Voyez le projet Arduino [http://arduino.cc/en/Tutorial/GalileoSampleSequencer Sampler/séquenceur Audio basé sur Galileo] que Verkstad à au Maker Faire de Rome.
+
Voyez le projet Arduino [http://arduino.cc/en/Tutorial/GalileoSampleSequencer Sampler/séquenceur Audio basé sur Galileo] que Verkstad à au Maker Faire de Rome.
== Fonctionnalités supportées par l'architecture Intel ==
== Fonctionnalités supportées par l'architecture Intel ==