29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 2 :
Ligne 2 : + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
aucun résumé de modification
{{traduction}}
{{traduction}}
= Un guide de démarrage rapide =
Let’s start with a quick description of what to do after you unpack your brand new toy. Our aim is not to bug you with complex details about it, but instead get you as quick as possible to the point you can start doing useful things with your device.
It is strongly recommended to update the firmware on your device before coding, this is described in section 1.3 below
This chapter will get you unboxed and ready to code in no time.
* Unboxing and the expansion board
* Connecting over USB
* Firmware Upgrades
* Micropython introduction
* Connecting the board and coding using Pymakr
If anyting goes wrong, there is a Troubleshooting section ([https://docs.pycom.io/pycom_esp32/pycom_esp32/troubleshooting.html#troubleshooting version anglaise ici]) that addresses the most common issues. In case of any doubts you can always ask questions in our [http://forum.pycom.io/ forum de la communauté] (''pycom.io, anglais'').
= Déballage et carte d'extension =
The only way to learn how to use something new is by doing. First, we need to put together the basic pieces:
* Look for the reset button on your module (located at a corner of the board).
* Look for the USB connector on your expansion board.
* Insert the module on the expansion board with the reset button pointing in the same direction as the USB connector.
It’s that simple! If you want to confirm your work, here’s a picture showing how to place your board properly on the expansion board:
[[Fichier:Hack-pycom-esp_32-10.png]]
[[Fichier:Hack-pycom-esp_32-11.png]]
If you prefer video tutorials, here is a [https://www.youtube.com/embed/wUxsgls9Ymw video] showing these steps. It applies to all our modules.
{{ambox|text=Some modules like the LoPy will be big enough to cover the USB connector. This is normal as long as you keep the orientation as shown.}}
To extend the life of your expansion board, please be aware of the following:
* Be gentle when plugging/unplugging the USB cable. Whilst the USB connector is well soldered and is relatively strong, if it breaks off it can be very difficult to fix.
* Static electricity can shock the components on the device and destroy them. If you experience a lot of static electricity in your area (eg dry and cold climates), take extra care not to shock the device. If your device came in a ESD bag, then this bag is the best way to store and carry the device as it will protect it against static discharges.
== Guide de la carte d'extension ==
The document explaining the hardware details of the expansion board can be found [https://github.com/WiPy/WiPy/blob/master/docs/User_manual_exp_board.pdf here] (pdf, PyCom.io).
== Brochage des cartes ==
Le brochage des cartes WiPy2 et Lopy sont décrit ici.
{{LOPY-TRAILER}}
{{LOPY-TRAILER}}