29 836
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 70 :
Ligne 70 : − In this picture there are male-male double adaptors to connect the servos to the header pins on the pyboard.+ + + + − The ground wire on a servo is usually the darkest coloured one, either black or dark brown. The power wire will most likely be red.+ + + + + + +
→Brancher un Servo Moteur
[[Fichier:MicroPython-Hack-servo.jpg|480px]]
[[Fichier:MicroPython-Hack-servo.jpg|480px]]
The ground wire on a servo is usually the darkest coloured one, either black or dark brown. The power wire will most likely be red.
[[Fichier:MicroPython-Hack-servo-wire-01.jpg|480px]]
Notez la broche de signal (fil blanc dans ce cas) à la droite du connecteur.
Comme les servo-moteurs sont équipés de fiche femelle, l'idéal est d'utiliser une {{pl|97|petite section pinHeader extra-long}} pour faciliter le raccordement.
[[Fichier:MicroPython-Hack-servo-wire-02.jpg|480px]]
Et voila, le servo-moteur moteur est branché sur le premier connecteur.
The power pin for the servos (labelled VIN) is connected directly to the input power source of the pyboard. When powered via USB, VIN is powered through a diode by the 5V USB power line. Connect to USB, the pyboard can power at least 4 small to medium sized servo motors.
The power pin for the servos (labelled VIN) is connected directly to the input power source of the pyboard. When powered via USB, VIN is powered through a diode by the 5V USB power line. Connect to USB, the pyboard can power at least 4 small to medium sized servo motors.