Modifications

Sauter à la navigation Sauter à la recherche
aucun résumé de modification
Ligne 8 : Ligne 8 :  
{{ambox-stop|text=Ajoutez une résistance de ~470 Ohms entre la broche de donnée du microcontrôleur et l'entrée de donnée NéoPixels ("''data input''")<br />sur le ruban NéoPixel pour prévenir pointes de tensions sur la ligne de donnée<br />qui pourrait endommager votre premier Pixel. Ajouter une résistance entre votre microcontroleur et les NéoPixels SVP!}}
 
{{ambox-stop|text=Ajoutez une résistance de ~470 Ohms entre la broche de donnée du microcontrôleur et l'entrée de donnée NéoPixels ("''data input''")<br />sur le ruban NéoPixel pour prévenir pointes de tensions sur la ligne de donnée<br />qui pourrait endommager votre premier Pixel. Ajouter une résistance entre votre microcontroleur et les NéoPixels SVP!}}
   −
NeoPixels are usually described as “5 Volt devices,” but the reality is a little more nuanced than that.
+
{{bloc-etroit|text=NeoPixels are usually described as “5 Volt devices,” but the reality is a little more nuanced than that.
    
Some (''not all'') NeoPixel products can work with slightly higher voltages. This depends on the additional support components around the chip, based on available space, cost and the most likely application. '''Refer to the specific product description page for guidance on acceptable voltage limits for each type. When in doubt, aim for 5 Volts'''.
 
Some (''not all'') NeoPixel products can work with slightly higher voltages. This depends on the additional support components around the chip, based on available space, cost and the most likely application. '''Refer to the specific product description page for guidance on acceptable voltage limits for each type. When in doubt, aim for 5 Volts'''.
    
'''Lower voltages are always acceptable''', with the caveat that the LEDs will be slightly dimmer. There’s a limit below which the LED will fail to light, or will start to show the wrong color.  
 
'''Lower voltages are always acceptable''', with the caveat that the LEDs will be slightly dimmer. There’s a limit below which the LED will fail to light, or will start to show the wrong color.  
 +
}}
    
{{asm-begin}}
 
{{asm-begin}}
29 917

modifications

Menu de navigation