Modifications
Sauter à la navigation
Sauter à la recherche
← Modification précédente
Modification suivante →
PYBD-Butterfly-ENG
(voir la source)
Version du 4 juillet 2021 à 14:24
2 octets ajoutés
,
4 juillet 2021 à 14:24
aucun résumé de modification
Ligne 23 :
Ligne 23 :
The both position are wired in parallele on the same I2C bus (so any position are right).
The both position are wired in parallele on the same I2C bus (so any position are right).
−
As this connector is quite small and more difficult to solder, we will start with its
connexion
pin.
+
As this connector is quite small and more difficult to solder, we will start with its
connection
pin.
{{asm-row|img=PYBD-Butterfly-asm-01.jpg|size=480px}}
{{asm-row|img=PYBD-Butterfly-asm-01.jpg|size=480px}}
Ligne 42 :
Ligne 42 :
−
Load the iron tip with some solder and drop off the solder on the
connexion
pin first (solder should easily melt down on the pads and the pins).
+
Load the iron tip with some solder and drop off the solder on the
connection
pin first (solder should easily melt down on the pads and the pins).
Once the pin soldered, secure the Grove connector in place by applying solder on the sides of the connector.
Once the pin soldered, secure the Grove connector in place by applying solder on the sides of the connector.
Admin
Bureaucrates
,
Administrateurs
29 837
modifications
Menu de navigation
Outils personnels
Se connecter
Espaces de noms
Page
Discussion
Variantes
Affichages
Lire
Voir le texte source
Voir l’historique
Plus
Rechercher
Navigation
ARDUINO
RASPBERRY-PI
[:: PI Hacking ::]
Particle.IO
Micro Python
Imprimante 3D
Actualités
Modifications récentes
Page au hasard
Aide
Outils
Pages spéciales
Version imprimable