Modifications

== Brochage du GPIO ==

== Brochage du GPIO ==

Pin numbering of the BCM2835 GPIO port(s) on the Raspberry Pi has been a source of great confusion since the designs for the Pi were first published. In the early days (even beofre hardware was avalable) the default usable GPIO pins were simply referred to by number as GPIO0 through GPIO7. Additionally there were pins for other purposes, SPI, I2C and serial. This was highlighted on the original image on the Raspberry Pi Wiki site too.

Pin numbering of the BCM2835 GPIO port(s) on the Raspberry Pi has been a source of great confusion since the designs for the Pi were first published. In the early days (even beofre hardware was avalable) the default usable GPIO pins were simply referred to by number as GPIO0 through GPIO7. Additionally there were pins for other purposes, SPI, I2C and serial. This was highlighted on the original image on the Raspberry Pi Wiki site too.

So when initially writing wiringPi, I chose to have the same default pin numbering scheme and numbered them from 0 upwards. This is no different to how the Arduino operates – “Pin 13″ on the Arduino is Port B, bit 5 for example. The underlying hardware definitions are hidden by a simplified numbering scheme. On the Pi, using wiringPi, pin 0 is BCM_GPIO pin 17 for example)

So when initially writing wiringPi, I chose to have the same default pin numbering scheme and numbered them from 0 upwards. This is no different to how the Arduino operates – “Pin 13″ on the Arduino is Port B, bit 5 for example. The underlying hardware definitions are hidden by a simplified numbering scheme. On the Pi, using wiringPi, pin 0 is BCM_GPIO pin 17 for example)

The following tables give the mapping of the Raspberry Pi GPIO Pins to the (P1) GPIO connector in relation to the pin numbers and the physical location on the connector. This is a representation of the GPIO connector as viewed looking at the board from above. The GPIO connector is to the top-right of the board with the Ethernet and USB sockets to the bottom.

The following tables give the mapping of the Raspberry Pi GPIO Pins to the (P1) GPIO connector in relation to the pin numbers and the physical location on the connector. This is a representation of the GPIO connector as viewed looking at the board from above. The GPIO connector is to the top-right of the board with the Ethernet and USB sockets to the bottom.

{{Pi-WiringPi-TRAILER}}

{{Pi-WiringPi-TRAILER}}