29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 2 :
Ligne 2 : + + + + + + + + + + + + + + + + + + + + + + + + + + +
aucun résumé de modification
{{traduction}}
{{traduction}}
These additional items are also needed for using and assembling the Romi 32U4 Control Board:
'''{{underline|Required accessories}}'''
* a Romi Chassis Kit (this includes motors, wheels, one ball caster, and battery contacts)
* a Romi Encoder Pair Kit
* six AA batteries. The Romi chassis and control board work with both alkaline and NiMH batteries, though we recommend rechargeable NiMH cells.
'''{{underline|Assembly tools}}'''
* soldering iron and solder (we recommend one with adjustable temperature control like the Hakko FX-888D Digital Soldering Station)
* small Phillips screwdriver
* USB A to Micro-B cable to connect the board to your computer for programming and debugging
'''{{underline|Optional tools}}'''
* small 2 mm slotted screwdriver for adjusting the LCD contrast
* small pair of pliers
* wire cutter and stripper, for adding wires for peripherals
* tape or small clamps (for holding parts together when soldering)
'''{{underline|Optional accessories}}'''
You might also consider getting these for your Romi 32U4 Robot:
* an 8×2 character LCD
* a compatible Raspberry Pi (Model B+ or newer, including Pi 3 Model B and Model A+)
* sensors, such as optical or sonar range finders
* connectors and jumper wires, for connecting additional sensors and components
* battery charger, if you are using rechargeable batteries; since the Romi just uses ordinary AA batteries, we recommend basic AA chargers (into which you stick the individual cells) available at most general electronics stores, though we carry a much fancier iMAX-B6AC V2 balance charger/discharger that can be also used for this
{{Pololu-Romi-32U4-TRAILER}}
{{Pololu-Romi-32U4-TRAILER}}