Modifications

'''We recently adjusted the kit so the buttons are on the right side instead of the left. The parts list is otherwise the same, its just a little more stable than before'''

'''We recently adjusted the kit so the buttons are on the right side<br />

instead of the left. The parts list is otherwise the same, its<br />just a little more stable than before'''

{{asm-row|img=RASP-LCD-RGB-ASM-02.jpg}}

{{asm-row|img=RASP-LCD-RGB-ASM-02.jpg}}

{{asm-text}}  

{{asm-text}}  

Put the printed circuit board into a vise or board holder, heat up your soldering iron and make sure you're ready to go!

Put the printed circuit board into a vise or board holder, heat up<br />

your soldering iron and make sure you're ready to go!

We'll start with the first resistor '''GREEN''' - which has orange, orange, brown, gold bands on it. This resistor acts as the backlight control resistor for the green backlight pin.

We'll start with the first resistor '''GREEN''' - which has orange, orange, brown, gold<br />

bands on it. This resistor acts as the backlight control resistor for the green backlight pin.

Bend the resistor into a 'staple' and slide it into the slot marked '''GREEN''' on the PCB. Resistors do not have a direction so you can put it in 'either way' and it'll work find.

Bend the resistor into a 'staple' and slide it into the slot marked '''GREEN''' on the PCB. Resistors do not have a direction so you can put it in 'either way' and it'll work find.