Modifications

Run the following commands to startx on the /dev/fb1 framebuffer, a.k.a PiTFT screen:

Run the following commands to startx on the /dev/fb1 framebuffer, a.k.a PiTFT screen:

{{ADFImage|RASP-PiTFT-Install-Pi2-Facile-00d.png}}

{{ADFImage|RASP-PiTFT-Install-Pi2-Facile-00d.jpg}}

You should see the Pi desktop show up on the TFT! Congrats, you've completed the first test perfectly.

You should see the Pi desktop show up on the TFT! Congrats, you've completed the first test perfectly.

{{ADFImage|RASP-PiTFT-Install-Pi2-Facile-00e.png}}

{{ADFImage|RASP-PiTFT-Install-Pi2-Facile-00e.jpg}}

Save the file and reboot the Pi with '''sudo reboot''' and look at the console output (or run '''dmesg''' in the console window after logging in) you will see the modules install. Look in particular for the STMPE610 detection and the ILI9340 screen frequency as highlighted here

Save the file and reboot the Pi with '''sudo reboot''' and look at the console output (or run '''dmesg''' in the console window after logging in) you will see the modules install. Look in particular for the STMPE610 detection and the ILI9340 screen frequency as highlighted here