* Connectez Pi ground to the ground rail of the breadboard. From the ground rail connect the other outer lead of the potentiometer, LCD pin 1 (VSS), and LCD pin 5 (R/W).
+
* Connectez la masse Pi (GND/Ground) sur le rail de masse/GND du breadboard.<br />Depuis le rail de masse connectez:
+
** Un fil sur une des broches du potentiomètre,
+
** la broche 1 du LCD (VSS)
+
** et la broche 5 du LCD (R/W).
* Connectez the middle lead of the potentiometer to LCD pin 3 (V0/contrast).
* Connectez the middle lead of the potentiometer to LCD pin 3 (V0/contrast).
* Connectez Pi pin 27 (or 21 on older revision Pi's) to LCD pin 4 (RS).
* Connectez Pi pin 27 (or 21 on older revision Pi's) to LCD pin 4 (RS).