Modifications

{{asm-img|img=Rasp-PiGRRL-2-Nappe-16.jpg}}

{{asm-img|img=Rasp-PiGRRL-2-Nappe-16.jpg}}

{{asm-img|img=Rasp-PiGRRL-2-Nappe-17.jpg}}

{{asm-img|img=Rasp-PiGRRL-2-Nappe-17.jpg}}

{{asm-text}} Grab the longer piece of the ribbon cable from earlier and lay the cut end over the top piece - The ribbon cable should nicely fit into the grooves of the top piece. Now grab the female connector and insert the top piece into back onto the connector. Make sure the arrow/triangle marking lines up with the side of the ribbon cable with the single white colored wire. Press the two pieces together and make sure the clips nicely fit into the sides of the connector.

{{asm-text}} Attrapez maintenant l'autre morceau du câble (la partie la plus longue) et placez le bout dans la pièces dorsale du connecteur fraîchement récupéré - Le ruban devrait parfaitement prendre place dans les creux. Saisissez maintenant le connecteur femelle et insérez la pièce dorsale au dessus du connecteur femelle. Make sure the arrow/triangle marking lines up with the side of the ribbon cable with the single white colored wire. Press the two pieces together and make sure the clips nicely fit into the sides of the connector.

{{asm-end}}

{{asm-end}}