Modifications

Sauter à la navigation Sauter à la recherche
882 octets ajoutés ,  18 juin 2014 à 21:29
Page créée avec « {{EZ-LINK-NAV}} == Can I use AT commands to configure the EZ-Link? == {{bloc-etroit|text=There is no command mode for EZ-Link, it is designed to be used out of the box. Sinc... »
{{EZ-LINK-NAV}}

== Can I use AT commands to configure the EZ-Link? ==
{{bloc-etroit|text=There is no command mode for EZ-Link, it is designed to be used out of the box. Since it automatically detects the baud rates there is no need to set that up.}}

You can initiate pairing from any computer. ==

== Can I change the BT name of my module? ==
{{bloc-etroit|text=At this time there is no way to change the BT name, it is hardcoded in and the last four digits match the lower two bytes of the MAC address}}

== Can EZ-Link act as a BT 'master'? ==
No, it is a client-mode only device.

== Hey! It's not working with my Android device! ==
{{bloc-etroit|text=Limit your Arduino sketch Serial communication speed to 9600 baud. This step is very important, if you try other baud rates the Android device will not be able to communicate with the Bluefruit EZ-link.}}

{{EZ-LINK-TRAILER}}
32 920

modifications

Menu de navigation