30 894
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 16 :
Ligne 16 : − +
→Bouton "PAIR"
The two blue LEDs are for monitoring the data received & sent. When data is sent from the computer to the module, the '''TX''' LED will blink. When data is sent from the module to the paired computer, the '''RX''' LED will blink. You can use this to debug your wiring and connection.
The two blue LEDs are for monitoring the data received & sent. When data is sent from the computer to the module, the '''TX''' LED will blink. When data is sent from the module to the paired computer, the '''RX''' LED will blink. You can use this to debug your wiring and connection.
== Bouton "PAIR" ==
== Bouton "PAIR" (appairage) ==
The pair button is used to reset the computer pairing for Bluetooth link. If you want to re-pair the module, press the button for 5 seconds, you'll see the red LED fast-blink to indicate its ready for pairing! You can now use your computer to Bluetooth-scan for the EZ-Link device.
The pair button is used to reset the computer pairing for Bluetooth link. If you want to re-pair the module, press the button for 5 seconds, you'll see the red LED fast-blink to indicate its ready for pairing! You can now use your computer to Bluetooth-scan for the EZ-Link device.