Modifications

Sauter à la navigation Sauter à la recherche
Page créée avec « {{Alim-Pixel-Accu-Pile-NAV}} {{bloc-étroit|text=Different battery types have different output voltages…a function of their internal chemistry. Among common household batt... »
{{Alim-Pixel-Accu-Pile-NAV}}

{{bloc-étroit|text=Different battery types have different output voltages…a function of their internal chemistry. Among common household batteries — the kinds you might find at the grocery store.}}

== There are two major types ==

=== Les piles rechargeables ===
{{ADFImage|Alim-Pixel-Accu-Pile-01.jpg}}

Rechargeable nickel metal hydride (NiMH) cells output '''1.2 Volts''', as do nickel cadmium (NiCd) cells. The latter have fallen out of favor for a number of reasons, but maybe you still have a few around the house.

These cells are more expensive up front, and require a charger. But for frequent use, they can be more economical in the long run.

=== Les piles alkaline ===
{{ADFImage|Alim-Pixel-Accu-Pile-02.jpg}}

Single-use, disposable alkaline cells output '''1.5 Volts'''.

Though not reusable, for occasional use they may be more economical. But the main benefit is their ubiquity — replacements can be bought almost anywhere, important when you’re away from home and a charger.

=== Note ===
(We’re using approximate numbers here. Actual output will vary by some fraction of a volt depending on the cell’s age, state of discharge, temperature and other factors. For most casual projects, these small factors can be ignored for simplicity’s sake.)

== Montage en série ==
When cells are wired in series (joined end to end, as when installed in our 4X AA battery holder), '''add up the voltages to determine the total output''':

{{ADFImage|Alim-Pixel-Accu-Pile-03.jpg}}

=== 4 piles NiMH ===
{{ADFImage|Alim-Pixel-Accu-Pile-04.jpg}}

4 NiMH cells = 4.8 Volts total. That’s right in our target voltage range, making it perfect for the LED strips! If you’re using rechargeables, the 4 cell holder can be used directly to power your project.

=== 4 piles Alkaline ===
{{ADFImage|Alim-Pixel-Accu-Pile-05.jpg}}

4 alkaline cells = 6.0 Volts total. Uh oh…'''that's too much'''! If connected directly to an LED strip, this will burn it out. Fortunately, there’s an easy workaround…

{{Alim-Pixel-Accu-Pile-TRAILER}}
32 920

modifications

Menu de navigation