Modifications

{{RASP-DRV8835-NAV}}

{{RASP-DRV8835-NAV}}

{{bloc-etroit|text=On the left side of the expansion board is a set of three pins surrounded by a box and labeled “5V”, “GND”, and “VOUT”. The “5V” pin is connected to the Raspberry Pi’s 5V power rail, while the VOUT pin provides access to the driver board’s motor supply voltage after reverse-voltage protection. If a suitable voltage regulator is connected to these three pins, it can generate 5 V to power the Raspberry Pi from the board’s motor supply voltage. We suggest using our S7V7F5 switching step-up/step-down regulator, which has a 2.7 V to 11.8 V input voltage range (similar to that of the DRV8835) and can supply up to 1 A of current to the Raspberry Pi.}}

{{bloc-etroit|text=Sur côté gauche de la carte d'extension, il y a un ensemble de 3 broches encadrée et accompagné de l'identification des broches "5V", "GND" et "VOUT".  

 

The “5V” pin is connected to the Raspberry Pi’s 5V power rail, while the VOUT pin provides access to the driver board’s motor supply voltage after reverse-voltage protection. If a suitable voltage regulator is connected to these three pins, it can generate 5 V to power the Raspberry Pi from the board’s motor supply voltage. We suggest using our S7V7F5 switching step-up/step-down regulator, which has a 2.7 V to 11.8 V input voltage range (similar to that of the DRV8835) and can supply up to 1 A of current to the Raspberry Pi.}}

[[Fichier:RASP-DRV8835-08.jpg|640px]]

[[Fichier:RASP-DRV8835-08.jpg|640px]]