Modifications

Sauter à la navigation Sauter à la recherche
1 483 octets ajoutés ,  22 mai 2016 à 18:07
Page créée avec « {{WIPY-NAV}} {{traduction}} == Prendre soin de votre WiPy == '''Prendre soin de votre WiPy et carte d'extension WiPy'''. Because the WiPy/expansion board does not have... »
{{WIPY-NAV}}

{{traduction}}

== Prendre soin de votre WiPy ==
'''Prendre soin de votre WiPy et carte d'extension WiPy'''.

Because the WiPy/expansion board does not have a housing it needs a bit of care:
* Be gentle when plugging/unplugging the USB cable. Whilst the USB connector is well soldered and is relatively strong, if it breaks off it can be very difficult to fix.
* Static electricity can shock the components on the WiPy and destroy them. If you experience a lot of static electricity in your area (eg dry and cold climates), take extra care not to shock the WiPy. If your WiPy came in a ESD bag, then this bag is the best way to store and carry the WiPy as it will protect it agains static discharges.

As long as you take care of the hardware, you should be okay. It’s almost impossible to break the software on the WiPy, so feel free to play around with writing code as much as you like. If the filesystem gets corrupt, see below on how to reset it. In the worst case you might need to do a safe boot, which is explained in detail here.


== Brancher la carte d'extension et mise sous tension ==

The expansion board can power the WiPy via USB. The WiPy comes with a sticker on top of the RF shield that labels all pins, and this should match the label numbers on the expansion board headers. When plugging it in, the WiPy antenna will end up on top of the SD card connector of the expansion board. A video showing how to do this can be found here.

{{WIPY-TRAILER}}
29 973

modifications

Menu de navigation