906 octets ajoutés
, 2 janvier 2017 à 20:42
{{BME280-NAV}}
{{traduction}}
<small>Toutes les images ci-dessous sont créditées à [http://www.adafruit.com Adafruit Industries] - All images here under are credited to [http://www.adafruit.com Adafruit Industries]</small>
{{asm-begin}}
{{asm-row|img=BME280-assembler-01.jpg}}
{{asm-text}} Prepare the header strip:
Cut the strip to length if necessary. It will be easier to solder if you insert it into a breadboard - long pins down
{{asm-row|img=BME280-assembler-02.jpg}}
{{asm-text}} Add the breakout board:
Place the breakout board over the pins so that the short pins poke through the breakout pads
{{asm-row|img=BME280-assembler-03.jpg}}
{{asm-text}} And Solder!
Be sure to solder all pins for reliable electrical contact.
{{asm-row|img=BME280-assembler-04.jpg}}
{{asm-text}} You're done! Check your solder joints visually and continue onto the next steps
{{asm-end}}
{{BME280-TRAILER}}