29 922
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
RASP-FT232H-MPSSE-Linux (voir la source)
Version du 19 février 2017 à 21:28
, 19 février 2017 à 21:28Page créée avec « {{RASP-FT232H-NAV}} {{traduction}} = Linux = To access the MPSSE mode on Linux we need to install libftdi and the Adafruit Python GPIO library. Carefully follow the ste... »
{{RASP-FT232H-NAV}}
{{traduction}}
= Linux =
To access the MPSSE mode on Linux we need to install libftdi and the Adafruit Python GPIO library. Carefully follow the steps below to install these libraries.
Note that these steps are made for Ubuntu 12.04/14.04 and should work with any Debian-based distribution. If you're using a different distribution you might need to check its package manager for the appropriate commands to install the mentioned dependencies.
In a command terminal execute the following commands to install libftdi and its dependencies:
<syntaxhighlight lang="Bash">
sudo apt-get update
sudo apt-get install build-essential libusb-1.0-0-dev swig cmake python-dev libconfuse-dev libboost-all-dev
wget http://www.intra2net.com/en/developer/libftdi/download/libftdi1-1.2.tar.bz2
tar xvf libftdi1-1.2.tar.bz2
cd libftdi1-1.2
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX="/usr/" ../
make
sudo make install
</syntaxhighlight>
The commands above should complete without any errors. If you do see errors, make sure all the dependencies were installed with the apt-get install command.
Next download the Adafruit Python GPIO library by clicking the button below:
{{RASP-FT232H-TRAILER}}
{{traduction}}
= Linux =
To access the MPSSE mode on Linux we need to install libftdi and the Adafruit Python GPIO library. Carefully follow the steps below to install these libraries.
Note that these steps are made for Ubuntu 12.04/14.04 and should work with any Debian-based distribution. If you're using a different distribution you might need to check its package manager for the appropriate commands to install the mentioned dependencies.
In a command terminal execute the following commands to install libftdi and its dependencies:
<syntaxhighlight lang="Bash">
sudo apt-get update
sudo apt-get install build-essential libusb-1.0-0-dev swig cmake python-dev libconfuse-dev libboost-all-dev
wget http://www.intra2net.com/en/developer/libftdi/download/libftdi1-1.2.tar.bz2
tar xvf libftdi1-1.2.tar.bz2
cd libftdi1-1.2
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX="/usr/" ../
make
sudo make install
</syntaxhighlight>
The commands above should complete without any errors. If you do see errors, make sure all the dependencies were installed with the apt-get install command.
Next download the Adafruit Python GPIO library by clicking the button below:
{{RASP-FT232H-TRAILER}}