Modifications

Sauter à la navigation Sauter à la recherche
Ligne 33 : Ligne 33 :  
* This tutorial does not need to use the MODE pin, '''make sure you have the mode switch in CMD mode''' if you do not configure & connect a MODE pin
 
* This tutorial does not need to use the MODE pin, '''make sure you have the mode switch in CMD mode''' if you do not configure & connect a MODE pin
 
* Don't forget to also '''connect the CTS pin on the Bluefruit to ground if you are not using it!''' (The Flora has this already done)
 
* Don't forget to also '''connect the CTS pin on the Bluefruit to ground if you are not using it!''' (The Flora has this already done)
  −
== Exécuter le croquis ==
  −
{{traduction}}
  −
Once you upload the sketch to your board (via the arrow-shaped upload icon), and the upload process has finished, open up the Serial Monitor via '''Tools > Serial Monitor''', and make sure that the baud rate in the lower right-hand corner is set to '''115200''':
  −
  −
{{ADFImage|Bluefruit-LE-Shield-HIDKeyboard-10.png}}
  −
  −
To send keyboard data, type anything into the textbox at the top of the Serial Monitor and click the Send button.
      
== Lier le clavier HID ==
 
== Lier le clavier HID ==
30 894

modifications

Menu de navigation