Modifications

{{ADFImage|Rasp-PiGRRL-2-Gamepad-02.png|640px}}

{{ADFImage|Rasp-PiGRRL-2-Gamepad-02.png|640px}}

== PiGRRL Gamepad PCB ==

== La carte Gamepad PiGRRL ==

Let's start assembly by putting the gamepad together. Gather up 10x 6mm tactile buttons and a 40pin IC box header. 

Commençons par assembler le gamepad. Mettez la main sur 10x boutons tactiles de 6mm et le connecteur 40 broches (celui qui se présente sous la forme d'une boîte). 

 

{{asm-begin}}

{{asm-begin}}

{{asm-img|img=Rasp-PiGRRL-2-Gamepad-05.jpg}}

{{asm-img|img=Rasp-PiGRRL-2-Gamepad-05.jpg}}

{{asm-text}}

{{asm-text}}

'''Install IC Box Header'''

'''Placez le connecteur IDC'''

Insert the box header into the header labeled pin on the back of the gamepad PCB. Make sure the "notch" opening is pointing towards the "header" label. Secure it in place by adding mounting tack to the sides. Now we can secure the PCB to a Panavise to assist while soldering.

Insert the box header into the header labeled pin on the back of the gamepad PCB. Make sure the "notch" opening is pointing towards the "header" label. Secure it in place by adding mounting tack to the sides. Now we can secure the PCB to a Panavise to assist while soldering.