29 922
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 7 :
Ligne 7 : − + − Secure the amp to a pair of helping third hands. Use the tip of the soldering iron to heat up solder and apply to the '''VIN''', '''GND''', '''A+''', '''A–''', '''+''' and '''–''' pins. This will make it easier to solder wires to the pins. − + − {{ADFImage|Rasp-PiGRRL-2-Ampli-04.jpg|640px}}+ + + − <h2> − <a href="#measure-wires-for-amp-and-speaker" class="anchor-link"><span class="fa fa-link"></span></a><span id="measure-wires-for-amp-and-speaker" class="anchor-link-target"></span>Measure Wires for Amp and Speaker</h2> − {{asm-begin}}
→Amplificateur et haut-parleur
{{asm-img|img=Rasp-PiGRRL-2-Ampli-02.jpg}}
{{asm-img|img=Rasp-PiGRRL-2-Ampli-02.jpg}}
{{asm-img|img=Rasp-PiGRRL-2-Ampli-03.jpg}}
{{asm-img|img=Rasp-PiGRRL-2-Ampli-03.jpg}}
{{asm-text}}
{{asm-text}} Placez votre ampli sur un outil 3ièmemain. Utilisez la pointe de votre fer à souder pour appliquer un peu de soudure sur les broches '''VIN''', '''GND''', '''A+''', '''A–''', '''+''' et '''–'''.
{{asm-end}}
Par la suite, cela facilitera la soudure des fil sur ces broches.
{{asm-img|img=Rasp-PiGRRL-2-Ampli-03.jpg}}
{{asm-text}} Mesurer les fils pour l'amplificateur et le haut-parleur
We'll need two pieces of 30AWG wires to connect the speaker to the amp. We recommend using silicone-coated stranded wire. Measure about 9cm in length for each wire. You don't have to use different colored wires, but we recommend it to help tell them apart.
We'll need two pieces of 30AWG wires to connect the speaker to the amp. We recommend using silicone-coated stranded wire. Measure about 9cm in length for each wire. You don't have to use different colored wires, but we recommend it to help tell them apart.
{{asm-row|img=Rasp-PiGRRL-2-Ampli-05.jpg}}
{{asm-row|img=Rasp-PiGRRL-2-Ampli-05.jpg}}
{{asm-img|img=Rasp-PiGRRL-2-Ampli-06.jpg}}
{{asm-img|img=Rasp-PiGRRL-2-Ampli-06.jpg}}