Modifications

{{ADFImage|Rasp-PiGRRL-2-Sortie-Audio-03.jpg|640px}}

{{ADFImage|Rasp-PiGRRL-2-Sortie-Audio-03.jpg|640px}}

== Connect Wires to Amp ==

== Connectez les fils sur l'ampli ==

Solder the negative (blue) wire to the A– pin on the amp, and the positive (red) wire to the A+ pin on the amp.

Soudez le fil bleu (négatif) sur la broche A– de l'ammplificateur -ET- le fil rouge (positif) sur la broche A+ .

{{ADFImage|Rasp-PiGRRL-2-Sortie-Audio-04.jpg|640px}}

{{ADFImage|Rasp-PiGRRL-2-Sortie-Audio-04.jpg|640px}}

{{traduction}}

{{ambox-stop|text=Les connexion audio sont confuses? You may notice the audio connections in the photo above are reserved. This photo is intended for the Pi 1 Model B+ (not the 2 or 3). Be sure to follow the first set of photos if you're using the Pi 2 or 3. If your using the Pi 1 Model B+, then reference the photo above.}}

No class registered in CONVERSION_CLASS for section build-alert alert-danger

<div class="alert">

Audio Connection Confusion? You may notice the audio connections in the photo above are reserved. This photo is intended for the Pi 1 Model B+ (not the 2 or 3). Be sure to follow the first set of photos if you're using the Pi 2 or 3. If your using the Pi 1 Model B+, then reference the photo above.

{{Rasp-PiGRRL-2-TRAILER}}

{{Rasp-PiGRRL-2-TRAILER}}