29 918
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Page créée avec « {{Pololu-Romi-Arm-NAV}} {{traduction}} {{POLImage|Pololu-Romi-Arm-Contenu-10.jpg|640px|Eléments inclus}} The Robot Arm Kit for Romi consists of the following items: *… »
{{Pololu-Romi-Arm-NAV}}
{{traduction}}
{{POLImage|Pololu-Romi-Arm-Contenu-10.jpg|640px|Eléments inclus}}
The Robot Arm Kit for Romi consists of the following items:
* One Micro Gripper with Position Feedback Servo
One micro servo with position feedback
One top micro gripper case
One bottom micro gripper case
One micro gripper plate
One micro gripper pinion gear
Two micro gripper paddles with rack
* One Romi expansion platform
* One main arm
* One rear tilt arm
* One front tilt arm
* One pivot stand
* Two servo mounting brackets
* One short linkage
* Two pivot transfer linkages
* One tilt servo horn
* One lift servo horn
* One alternate tilt servo horn attachment
* One alternate life servo horn attachment
* Two standard-sized servos with position feedback
* Six 20 mm nylon spacers, 4 mm OD, 2.7 mm ID
* Three 6 mm nylon spacers, 4 mm OD, 2.7 mm ID
* Two 1.5″ aluminum standoffs, #2-56 thread, M-F
* Two 1″ aluminum standoffs, #2-56 thread, M-F
* Six 1″ #2-56 Machine screws
* Three 3/8″ #2-56 machine screws
* Four 1/4″ #2-56 machine screws
* Thirteen #2-56 hex nuts
* Nine #2 washers
* Six 8 mm M3 machine screws
* Six M3 hex nuts
{{POLImage|Pololu-Romi-Arm-Contenu-01.jpg|640px|Eléments inclus}}
{{POLImage|Pololu-Romi-Arm-Contenu-02.jpg|640px|Eléments inclus}}
{{POLImage|Pololu-Romi-Arm-Contenu-03.jpg|640px|Eléments inclus}}
{{Pololu-Romi-Arm-TRAILER}}
{{traduction}}
{{POLImage|Pololu-Romi-Arm-Contenu-10.jpg|640px|Eléments inclus}}
The Robot Arm Kit for Romi consists of the following items:
* One Micro Gripper with Position Feedback Servo
One micro servo with position feedback
One top micro gripper case
One bottom micro gripper case
One micro gripper plate
One micro gripper pinion gear
Two micro gripper paddles with rack
* One Romi expansion platform
* One main arm
* One rear tilt arm
* One front tilt arm
* One pivot stand
* Two servo mounting brackets
* One short linkage
* Two pivot transfer linkages
* One tilt servo horn
* One lift servo horn
* One alternate tilt servo horn attachment
* One alternate life servo horn attachment
* Two standard-sized servos with position feedback
* Six 20 mm nylon spacers, 4 mm OD, 2.7 mm ID
* Three 6 mm nylon spacers, 4 mm OD, 2.7 mm ID
* Two 1.5″ aluminum standoffs, #2-56 thread, M-F
* Two 1″ aluminum standoffs, #2-56 thread, M-F
* Six 1″ #2-56 Machine screws
* Three 3/8″ #2-56 machine screws
* Four 1/4″ #2-56 machine screws
* Thirteen #2-56 hex nuts
* Nine #2 washers
* Six 8 mm M3 machine screws
* Six M3 hex nuts
{{POLImage|Pololu-Romi-Arm-Contenu-01.jpg|640px|Eléments inclus}}
{{POLImage|Pololu-Romi-Arm-Contenu-02.jpg|640px|Eléments inclus}}
{{POLImage|Pololu-Romi-Arm-Contenu-03.jpg|640px|Eléments inclus}}
{{Pololu-Romi-Arm-TRAILER}}